Feed rollers and paper guides – Tektronix Phaser 600 User Manual
Page 556
Advertising
Q
U I C K
C L E A N I N G
5 4 0
Feed rollers and paper guides
Clean the feed rollers and paper guides after
every 80 E-size (34 x 44 in.) sheets of media
(approximately 100 m/300 ft. of 36-inch wide roll
media).
N O T E
If any paper is currently loaded, remove it and set
it aside.
1
To open the top cover, lift the latch that is on the upper right side of the printer;
then lift the cover.
2
Moisten a lint-free cloth with 90% pure isopropyl alcohol
(or use a pre-soaked alcohol cloth).
9480-78
9480-17
Advertising