Tektronix Phaser 600 - Manual (Page 588)

E M P T Y I N G T H E W A S T E B I N
5 7 2
Before moving the printer
The printer locks the waste bin in place until it needs emptying. However, you can
use the
Utilities menu to unlock the waste bin so that you can empty it before the
front panel message prompts you to do so.
1 When the printer is on and the Ready message appears in the front panel,
access the Utilities menu by pressing the Menu button, then press an arrow
button until you see this message:
Utilities
<--- ---> Menu
2 Press the Menu button.
3 Press an arrow button until you see this message:
Unlock Waste Bin
<--- ---> Select
4 Press the Select button to unlock the waste bin. The front panel displays this
message:
Waste Bin Unlocked
5 Remove and empty the waste bin (see Front panel displays Empty Waste Bin ),
then re-insert it into the printer.