Tektronix Phaser 600 - Manual (Page 173)

A L L A B O U T M E D I A
1 5 7
All about media
Selecting media by size
You can select media by size
through the printer drivers or from
the front panel. This printer is
capable of printing on cut-sheet
media in several sizes (refer to the
table on the
Page size, print area,
and margins ), as well as media
rolls ranging in width from
175 to 914 mm (7 in. to 36 in.).
Tektronix offers paper rolls with the widths shown in the illustration.
N O T E
The Tektronix media rolls have a three-inch core. If you are using a media roll with a
two-inch core, you must remove the adapter on the paper roll holder. Refer to
Using
a 2-inch core media roll: removing the core adapter for instructions.
9480-51
914 mm
(36 in.)
610 mm
(24 in.)