Tektronix Phaser 600 - Manual (Page 76)

P C / W I N D O W S S O F T W A R E
6 0
6. Select your printer and click OK :
■
Tektronix Phaser 600 (standard configuration)
■
Tektronix Phaser 600 with Extended features (Extended Features option)
Note Press and hold down the printer’s button on the front panel for configuration information.
7. Type in the drive’s path from Step 5 ; click Continue .
8. Click Ignore when prompted for the location of the PSCRPTUI.DLL and PSCRIPT.DLL files.
9. In the Create Printer dialog box, fill in the other fields as desired, then click OK .
10. Select options in the PostScript Printer Setup dialog box. Click OK .
Recommended: enable the Use Printer Halftoning option.
11. If you installed a PostScript printer in Step 3 , delete it now:
a. Select the printer you want to remove.
b. Select Remove Printer in the Printer menu. Click OK.
End
Setting up a PostScript driver for Windows NT 3.5 and 3.51 (cont'd.)