Cleaning the exit rollers – Tektronix Phaser 600 User Manual
Page 577
Advertising
O
C C A S I O N A L
C L E A N I N G
5 6 1
Cleaning the exit
rollers
Clean the exit rollers
whenever you clean the
fuser shuttle or replace
its components.
Using an
alcohol-moistened
lint-free cloth, clean
these parts:
a
Wipe the metal exit roller thoroughly to remove any paper dust build-up;
turn the roller to clean its entire surface.
b
Wipe the metal fuser plate (especially the section closest to the rubber
roller) to remove dust and ink.
c
Wipe the rubber exit roller thoroughly; turn the roller to clean its entire
surface.
C A U T I O N
To avoid damaging or obscuring the exit sensor, do not get any alcohol on it.
9480-29
a
b
c
Advertising