Removing the fuser components – Tektronix Phaser 600 User Manual
Page 573
Advertising
O
C C A S I O N A L
C L E A N I N G
5 5 7
Removing the fuser components
N O T E
You must remove the fuser wheel before the foam
oiler wheel.
1
Remove the fuser wheel (and media support)
by lifting it out of the printer.
2
Remove the foam oiler wheel. Be careful not
to squeeze the foam; it is filled with oil and
the oil might drip.
9480-31.CD
9480-25.CD
Advertising