Tektronix Phaser 600 - Manual (Page 79)

P C / W I N D O W S S O F T W A R E
6 3
Setting up a PostScript driver for Windows NT 4.0
Note The Windows NT driver does not support the PhaserMatch application. Refer to Which Windows driver to
install? for information on drivers that do.
You must have your original Windows NT setup diskettes (or CD-ROM) to complete this procedure.
For information on installing a driver for a Windows NT 4.0 client on a Windows NT 3.51 server, refer to the
Tektronix on-line services. See If you need help for instructions on using the on-line services.
1. In the Printers Folder , double-click the Add Printer icon.
2. From the Add Printer menu, follow the Add Printer Wizard instructions until the
Manufacturers/Printers window appears. Click on Have Disk .
3. In the Install From Disk dialog box, do the following:
a. Click Browse.
b. In the Open dialog box select the Drive for the printer's CD-ROM.
c. Select the \WIN95_NT directory under Folders; click OK.