Important guidelines – Tektronix Phaser 600 User Manual
Page 503
C
O N N E C T I N G
A
S C S I
H A R D
D I S K
4 8 7
Important guidelines
When connecting a hard disk to the printer, follow these guidelines:
■
The printer can support up to six external disks,
or
four disks and one
Copystation.
■
You must turn
on
the disk(s)
before
you turn on the printer. Wait at least
one minute after turning on the disk(s) before turning on the printer.
■
Terminators:
■
The printer must always be at one end of the chain with a terminator at
the other end (or a terminated device such as the Phaser Copystation).
■
The printer has an internal terminator.
■
SCSI ID numbers:
■
With multiple disks, each disk must have a unique SCSI ID number. Do
not turn on the printer or disk
until each disk has a unique number
.
■
The printer’s SCSI number is
7
, and the internal disk is number
4
.
Valid ID numbers for the external disk are
0
,
1
,
2
,
3
,
5
and
6
.