Front panel messages – Tektronix Phaser 600 User Manual
Page 609
F
R O N T
P A N E L
M E S S A G E S
5 9 2
Front panel messages
The front panel displays messages indicating the condition of the printer. Some
messages, such as
Standby
and
Warming Up
, simply provide status information.
These messages do not require user action. Error messages, such as
Close Exit
Cover
, require you to perform some action. Use the following table to determine the
appropriate action for each type of front panel message.
The printer may display a numeric error code when it detects certain types of
problems. If you see a numeric error code, first write down the number. Try turning
off the printer’s power and wait at least 15 seconds before turning the power on
again. If that does not solve the problem, call your local Tektronix office for
assistance or call Tektronix Service at
1-800-835-6100
(U.S.) or at
1-800-563-1289
(Canada).