Printing postscript files, Eceive postscript; see – Tektronix Phaser 600 User Manual
Page 540
C
H A N G I N G
T H E
P R I N T E R
’
S
L A N G U A G E
M O D E
5 2 4
Printing PostScript files
Use the
PSCRIPT.PS
file to change a printer’s port to accept
only
PostScript data.
After you copy this file to a port, the printer expects PostScript files on that port. The
port’s language change is persistent across print jobs and across printer power
cycles. To use, send the
PSCRIPT.PS
file to the printer.
1
Locate the utility files on the Phaser 600 printer’s CD-ROM; refer to
2
Use one of the following methods to send the
PSCRIPT.PS
file to the printer:
■
PC users
: Use the DOS
COPY
command to send the file to the printer.
(Windows 3.1 users can also use the
Copy
command in the
File
Manager
.)
■
Workstation users:
Send the file to a printer as you would any
PostScript file.