What happens at power-up – Tektronix Phaser 600 User Manual
Page 51
Advertising
C
O N N E C T I N G
T H E
P R I N T E R
3 5
What happens at power-up
■
Both status indicators (power
and error
) on the printer’s front panel
light briefly. Messages appear in the display panel (LCD) as the printer
goes through a series of self-tests.
■
While initializing, the printer makes various mechanical sounds; the front
panel displays this message as it performs an automatic head cleaning
procedure:
The printer takes about 10-12 minutes to warm up and complete the self-tests
(depending on the amount of memory installed).
9480-12.CD.2
Initializing...
9480-12.CD.3
Cleaning...
Advertising