Tektronix Phaser 600 - Manual (Page 40)

S E T T I N G U P T H E P R I N T E R
2 4
Loading the ink
1 Remove the ColorStix ink sticks
from their packaging by peeling off
the paper cover.
2 Open the ink loader cover.
3 Insert the ColorStix ink sticks into
the appropriate holes for each
color. Each color ink stick is
uniquely shaped to make ink
loading easy. Load the ink sticks from the bottom of the ink loader to the top.
C A U T I O N
Load only one ink stick in each slot; otherwise the ink sticks might jam and the cover
will not close.
Do not load more than eight ink sticks of any color at one time.
Open only the ink sticks you will immediately use; exposure to dust and overhandling
can cause an ink jam.
9480-05