Tektronix Phaser 600 - Manual (Page 39)

S E T T I N G U P T H E P R I N T E R
2 3
Attaching the ink loader
1 Remove the ink loader and the screw from
the packaging.
2 Slide the ink loader into the printer as shown.
3 Insert the screw into the opening (on the rear
side of the ink loader and printer) to secure
the ink loader to the printer; tighten the screw
by hand; no tools are necessary.
4 Remove the adhesive tape that secures the
four sliders.
2
9480-42
3
9480-55
4