Tektronix Phaser 600 - Manual (Page 78)

P C / W I N D O W S S O F T W A R E
6 2
4. For Name or address of host providing
lpd , type your printer’s IP address
(or Host name if known to the network).
Note The printer’s IP address may be available on the
printer’s configuration page. If not, ask your
network administrator.
4. Double-click on the appropriate
zone (if there are multiple
AppleTalk zones).
Select your Tektronix printer and
click OK.
5. For Name of printer on that machine ,
type in one of the following:
PS for PostScript
AUTO for automatic selection;
use capital letters
5. At the prompt Do you want to
capture this AppleTalk Printing
Device?
, click No .
Note Clicking Yes hides the printer from
regular Macintosh users, forcing them
to use NT Server as a spooler, as long
as NT Server allows sharing of this
printer.
6. Click OK to complete the
installation.
6. Click OK to complete the
installation.
End
Setting up the printer on a network for Windows NT 3.5 and 3.51 (cont'd.)
TCP/IP Connection AppleTalk Connection