Of the next pr – Tektronix Phaser 600 User Manual
Page 73
P C / W
I N D O W S
S O F T W A R E
5 7
4.
Return to
Installing printer software for
to perform Step
and Step
of the installation procedure.
Then go on to Step
procedure, below.
5.
Select your printer and click
Install
:
■
Tektronix Phaser 600
(standard configuration)
■
Tektronix Phaser 600 - Extended
(Extended Features option)
Note
Press and hold down the front panel’s
button for configuration information.
6.
Click
OK
; click
Close
; click
OK
.
Note
See the
Adobe PostScript Printer Driver
User Guide on the printer’s CD-ROM
(
USRGUIDE.PDF) for detailed information
on the AdobePS 3 driver.
1.
In the
Control Panel
, double-click
Printers
.
2.
Select the
Tektronix Phaser 600
printer you installed in the above procedure;
click
Connect
.
3.
Select the port the printer is connected to; click
OK
.
End
Setting up the drivers for Windows 3.1 (cont'd.)
Tektronix driver
Adobe PostScript driver