Tektronix Phaser 600 - Manual (Page 46)

C O N N E C T I N G T H E P R I N T E R
3 0
2 Parallel (standard)
The printer supports a standard (uni-directional) parallel port. The port can
also be set for bi-directional communications using downloadable utility files
(available on the printer’s CD-ROM, diskettes, or from your World Wide Web
browser).
■
Use a high-density bi-directional parallel cable, available from most
computer cable vendors; or order a 36-pin high-density printer to
25-pin DSUB PC cable from Tektronix (order number: 012-1468-00).
Otherwise, you can use a 36-pin to 36-pin parallel cable and the
parallel adapter supplied with the printer.
■
Connect a parallel interface cable to your computer and to the printer’s
parallel port:
9480-58
SCSI Disk Parallel
Service only
Status