Tektronix Phaser 600 - Manual (Page 685)

M E D I A H I N T S A N D T I P S
6 6 8
1 For each endcap:
Align the tabs (a) o
n the inside of the
adapter with the “V”-shaped openings
(
b ) on the endcap’s core. The 4 teeth ( c )
of the adapter fit over the endcap’s core.
Slide the adapter onto the endcap and
push until it snaps into place.
2 Load the media roll as you would normally:
■
Slide the media roll onto the shaft, so that the fixed endcap fits inside
the core of the media roll.
■
Replace the removable endcap.
9480-132
a
b c