Tektronix Phaser 600 - Manual (Page 93)

M A C I N T O S H S O F T W A R E
7 7
4. Click on the Zone your printer is in. See your network administrator if you have questions.
5. Select your printer from the list.
6. Still in the Chooser , click the Setup button to see a list of options.
7. The correct PPD file is automatically selected. If it is not, click on the PPD for your printer, then
click Select :
■
TKPH6001.PPD Standard configuration
■ TKP600P1.PPD Extended Features option
Note Press and hold down the printer’s button on the front panel for configuration information.
8. Select the appropriate items under Installable Options , then click OK .
9. Close the Chooser .
End
Setting up the Apple LaserWriter 8 driver (cont'd.)