Tektronix Phaser 600 - Manual (Page 507)

C O N N E C T I N G A S C S I H A R D D I S K
4 9 1
Connecting multiple disks
C A U T I O N
To avoid damaging components, turn off the printer and external disk before you
connect or disconnect a SCSI cable. Turn on the disks before you turn on the printer.
The printer can support up to six external disks. When you have more than one disk
connected to the printer, follow these guidelines.
■ Each disk must have a unique SCSI ID number. Do not turn on the printer
or disk until each disk has a unique number.
■ The printer must always be at one end of the chain with a terminator at the
other end.