Using the pc/workstation setscreen utility file – Tektronix Phaser 600 User Manual
Page 666
Advertising
P
R I N T E D
C O L O R S
A R E
N O T
W H A T
Y O U
E X P E C T E D
6 4 9
Using the PC/workstation Setscreen utility file
1
to install the utility files from
either the Phaser 600 CD-ROM or the Printer Software for Windows diskette.
2
Locate the installed files in the
PHSR600
subdirectory, inside the
PHSRTOOL
directory on your hard disk.
3
Use one of the following files:
■
Select
SCREENON.PS
to enable setscreen operations.
■
Select
SCRENOFF.PS
to disable setscreen operations.
4
Use one of the following methods to send a file to the printer:
■
PC users:
Use the DOS
COPY
command, or the
Copy
command in
Windows 3.1
File Manager
, to send the file to the printer.
■
Workstation users:
Send the file to the printer as you would any
PostScript file.
Advertising