Tektronix Phaser 600 - Manual (Page 623)

S Y M P T O M S A N D S O L U T I O N S
6 0 6
Printer not
printing, even
though you’ve
configured a
supported driver
for your printer
(cont’d.). Using the PS Error Handler
Follow these steps to use the PostScript Error Handler, after trying the
previous suggestions:
1. Set the PS Error Handler to on in the front panel’s Printer Defaults menu.
2. Use the error handler utility to determine what is wrong. Refer to Using a
PostScript error handler for information on using the error handler.
If you can’t print
from Windows to
an LPT port Windows 3.1
1. Double-click the Printers icon in the Control Panel .
2. In the Printers dialog box, choose your printer from the list of installed
printers.
3. Click the Connect button; the Connect dialog box appears.
4. Change your port connection from LPT x to LPT x.DOS (where x is 1, 2, or
3).
5. Click OK .
Refer to Fixing timeout problems in Windows for instructions on fixing timeout
problems in Windows.
If you can’t make a print (cont'd.)
Symptom Solution