Tektronix Phaser 600 - Manual (Page 478)

E N A B L I N G A N D D I S A B L I N G J O B P I P E L I N I N G
4 6 2
Enable/disable job pipelining from a PC
1 See Installing the utility files to locate the printer’s utility files.
2 Select one of the following files:
■
Use the PIPE_ON.PS file to turn on print job pipelining.
■
Use the PIPE_OFF.PS file to turn off print job pipelining.
3 Use one of the following methods to send the desired file to the printer:
■
PC users : Use the DOS COPY command to send the file to the printer.
(Windows 3.1 users can also use the Copy command in the File
Manager .)
■
Workstation users : Send a file to the printer as you would any
PostScript file.