Tektronix Phaser 600 User Manual
Page 491
C
O N F I G U R I N G
A
P R I N T E R
’
S
S E R I A L
P O R T
4 7 5
1
to locate the printer’s utility files.
2
View the
DEVPARAM.PS
file in a text editor and substitute the values you want
to use for the current values. The possible values for each parameter are
listed in the
table; the values are case-sensitive and must be
entered exactly as shown in the table.
3
Save the file.
4
The printer’s port you are using should be configured to receive PostScript. If
you have questions, see
Using Different Printer Language Modes
for more
information.
5
Use one of the following methods to send the file to the printer:
■
PC users
: Use the DOS
COPY
command to send the file to the printer.
(Windows 3.1 users can also use the
Copy
command in the
File
Manager
.)
■
Workstation users:
Send the file to the printer as you would any
PostScript file.