Tektronix Phaser 600 - Manual (Page 456)

D O W N L O A D I N G F I L E S T O T H E P R I N T E R
4 4 0
Downloading files from Windows 95
Use the DOS COPY command to send the desired file to the printer. To find the
DOS prompt, follow this procedure:
1 Click Start in the taskbar on your screen.
2 In the menu that appears select Programs .
3 Select MS-DOS Prompt from the list.
See Installing the utility files to locate the printer’s utility files.
■ If your printer is connected to the parallel (LPT) port, type the following
command (where
x is 1, 2, or 3):
COPY RESET.PS LPTx:
■ If your printer is connected to the optional serial (COM) port, type the
following command (where
x is 1, 2, or 3):
COPY RESET.PS COMx:
■ If your printer is connected to an optional Novell or TCP/IP network, you
should follow the instructions provided with your network software.