Technical data, Materials, Applicable standards – Xylem IM167 R8 Aquavar CPC (Centrifugal Pump Control) User Manual
Page 146
146
Materials
Materials Specifications
• PC/ABS 2.5 mm, color NCS 1502-Y (RAL 90021 / PMS 420 C and 425 C)
Drive
• Hot-dip zinc coated steel sheet 1.5…2 mm, thickness of coating 100 micrometers.
Enclosure
• Cast aluminium AlSi
• Extruded aluminium AlSi
Package
Corrugated board (drives and option modules), expanded polystyrene.
Plastic covering of the package: PE-LD, bands PP or steel.
The drive contains raw materials that should be recycled to preserve energy and natural
resources. The package materials are environmentally compatible and recyclable. All
metal parts can be recycled. The plastic parts can either be recycled or burned under
controlled circumstances, according to local regulations. Most recyclable parts are
marked with recycling marks.
Disposal
If recycling is not feasible, all parts excluding electrolytic capacitors and printed circuit
boards can be landfilled. The DC capacitors contain electrolyte and the printed circuit
boards contain lead, both of which will be classified as hazardous waste within the EU.
They must be removed and handled according to local regulations.
For further information on environmental aspects and more detailed recycling
instructions, please contact your local recycler.
Applicable Standards
The drive complies with the following standards. The compliance with the European Low Volt-
age Directive is verified according to standards EN 50178 and EN 60204-1.
Applicable Standards
EN 50178 (1997)
Electronic equipment for use in power installations.
EN 60204-1
Safety of machinery. Electrical equipment of machines. Part 1: General requirements.
(1997)
Provisions for compliance: The final assembler of the machine is responsible for
installing:
• An emergency-stop device
• A supply disconnecting device
EN 60529: 1991
Degrees of protection provided by enclosures (IP code).
(IEC 529), IEC
60664-1 (1992)
EN 61800-3
EMC product standard including specific test methods.
(1996) +
Amendment
A11 (2000)
UL 508C
UL Standard for Safety, Power Conversion Equipment, second edition.
TECHNICAL DATA