Xylem IM167 R8 Aquavar CPC (Centrifugal Pump Control) - Manual (Page 147)

147
UL Markings
The AQUAVAR is suitable for use on a circuit capable of delivering not more than 65,000 RMS
symmetrical amperes, 480 V maximum. The AQUAVAR has an electronic motor protection
feature that complies with the requirements of UL 508C. When this feature is selected and
properly adjusted, additional overload protection is not required unless more than one motor
is connected to the drive or unless additional protection is required by applicable safety
regulations.
The drives are to be used in a controlled environment. See section “Ambient Conditions” on
page 145 for specific limits.
Liability Limits
The manufacturer is not responsible for:
• Any costs resulting from a failure if the installation, commissioning, repair, alteration
or ambient conditions of the drive do not fultill the requirements specified in the
documentation delivered with the unit and other relevant documentation.
• Units subjected to mususe, negligence or accident.
• Units comprised of materials provided or designs stipulated by the purchaser.
In no event shall the manufacturer, its suppliers or subcontractors be liable for special,
indirect, incidental or consequential damages, losses or penalties.
If you have any questions concerning your product, please contact the local distributor or
CentriPro. The technical data, information and specifications are valid at the time of printing.
The manufacturer reserves the right to modifications without prior notice.
TECHNICAL DATA