Xylem IM167 R8 Aquavar CPC (Centrifugal Pump Control) - Manual (Page 45)

45
Wizards
The “Wizard” configures the drive. This process sets parameters that define how the drive op-
erates and communicates. Depending on the control and communication requirements, the
start-up process may require any or all of the following:
• The Start-up Wizard steps you through the default configuration. The Start-up Wizard can
be activated at the first power up, or can be accessed at any time using the main menu.
• Application macros can be selected to define common, alternate system configurations, us-
ing the default settings. See “Single or Multipump Setup/Programming” on page 73.
• Additional refinements can be made using the control panel to manually select and set
individual parameters. See “Complete Parameter Descriptions” on page 50.
Assistant Control Panel (Display)
Features
The AQUAVAR CPC Control Panel features:
• Alphanumeric control panel with a LCD display
• Language selection for the display
• Drive connection that can be made or detached at any time
• Start-Up Wizard to ease drive commissioning
• Copy function – Parameters can be copied to the Control Panel memory for later transfer to
other drives or for backup of a particular system.
• Context sensitive help
Control Panel (Keypad)
The following table summarizes the button functions and displays on the Control Panel.
START-UP
DIR MENU
REM
40.2 PSI sp
0.0 PSI ac
0.0 HZ
12:45
50%
LOC
REM
LCD Display – Divided into three main areas:
• Top line – variable, depending on the mode of operation.
For example, see “Status Information”
• Middle area – variable, in general, shows parameter values, menus or
lists.
• Bottom line – shows current function of the two soft keys and the clock
display, if enabled.
Soft key 1 – Function varies and is
defined by the text in the lower-left
corner of the LCD display.
Soft key 2 – Function varies and is
defined by the text in the lower-right
corner of the LCD display.
Up Arrow
• Scrolls up through a menu or list
displayed in the middle of the LCD
Display.
• Increments a value if a parameter
is selected.
• Increments the reference if the
upper-right corner is highlighted
(in reverse video).
LOC/REM – Changes between local
and remote control of the AQUAVAR.
Down Arrow
• Scrolls down through a menu or list
displayed in the middle of the LCD
Display.
• Decrements a value if a parameter
is selected.
• Decrements the reference if the
upper-right corner is highlighted
(in reverse video).
Help – Displays context sensitive
information when the button is pressed.
The information displayed describes the
item currently highlighted in the middle
area of the display.
STOP – Stops the drive.
START – Starts the drive.