Lenze EtherCAT control technology - Manual (Page 140)

Control technology | EtherCAT communication manual
Diagnostics
Diagnostic codes
140
L
DMS 3.1 EN 01/2011 TD17
11.3 Diagnostic codes
The diagnostic codes can be displayed in the »Engineer« and »WebConfig«.
 Interface parameters of the MC-ETC communication card in slot 1
( 167)
 Interface parameters of the MC-ETC communication card in slot 2
( 183)
11.4 Logbook of the IPC
»Engineer« and »WebConfig« provide access to the IPC logbook.

Note!
The ClearLog button deletes the contents of the logbook on the IPC without a
prior confirmation prompt.