Lenze EtherCAT control technology - Manual (Page 57)

DMS 3.1 EN 01/2011 TD17
L
57
Control technology | EtherCAT communication manual
Commissioning of the system
Detailed commissioning steps
7.2.7.1 Setting up the EtherCAT configuration in the device tree

How to set up the EtherCAT configuration in the device tree:
1. Create a new project in the »EtherCAT Configurator«:
• Menu command: FileNew Project.
2. Map the physical configuration in the device tree:
• Add the individual field devices to the EtherCAT_Master of the configuration:
Execute the Add Device command of the EtherCAT_Master context menu:

Note!
The order of the devices in the »EtherCAT Configurator« must correspond with
the physical structure of the EtherCAT configuration.