Lenze EtherCAT control technology - Manual (Page 28)

Control technology | EtherCAT communication manual
The Lenze control system with EtherCAT
Required engineering tools
28
L
DMS 3.1 EN 01/2011 TD17
4.3 Required engineering tools
 The engineering tools required for configuration and parameter setting are installed on
the engineering PC.
 »Engineer«, »EtherCAT Configurator« and »PLC Designer« are engineering PC tools
which are independent of each other.
 The EtherCAT bus, the industrial PC and the EtherCAT-capable field devices are
configured with the engineering tools highlighted in grey.