7 export of ethercat configuration, Export of ethercat configuration – Lenze EtherCAT control technology User Manual
Page 67
DMS 3.1 EN 01/2011 TD17
L
67
Control technology | EtherCAT communication manual
Commissioning of the system
Detailed commissioning steps
7.2.7.7
Export of EtherCAT configuration
First save your project with the menu command FileSave project to in the project folder
before you export the EtherCAT configuration.
During the export of the EtherCAT configuration, the configuration files
ECAT_PLC_CFG_1.XML and ECAT_MASTER_1.XML created.
At a later time, you have to
import the ECAT_PLC_CFG_1.XML file into the control configuration using the »PLC
Designer«.
write the ECAT_MASTER_1.XML file for the EtherCAT master stack to the IPC.
How to export the EtherCAT configuration files:
1. Select Export EtherCAT Configuration from the context menu of the master:
2. A directory tree appears. Select the prepared project folder for storing.
3. Confirm the selection by clicking the OK button.
The configuration files ECAT_PLC_CFG_1.XML and ECAT_MASTER_1.XML is now
saved to the project folder.