Lenze EtherCAT control technology - Manual (Page 142)

Control technology | EtherCAT communication manual
Diagnostics
Logbook of the IPC
142
L
DMS 3.1 EN 01/2011 TD17
11.4.2 Messages in the logbook of the industrial PC
 Errors, warnings or information are indicated as messages in the logbook.
 Read the messages in the logbook from bottom to top. The most recent message
always appears at the top of the logbook.
Structure of the messages in the logbook:
Examples of logbook messages
• Consecutive number
• Date/time of occurrence
• Location of occurrence
• Type of EtherCAT message: CTRL, PRJ, CFG, SLV, PRJ, LLA, RAP, ISW
(see System error messages ( 157) )
• Error description
• Message type: error / warning / information
...
00007 14-06-2008 10:48:11
EtherCAT Master Stack CTRL: Cannot set EtherCAT-Master to init! (Errorcode =
0x98110010), retry...
Communication on bus systems
Error
00006 14-06-2008 10:47:56
EtherCAT Master Stack CTRL: Master state change from <init> to <unknown>
Communication on bus systems
Information
00005 14-06-2008 10:47:55
EtherCAT Master Stack CTRL: Cannot set EtherCAT-Master to preop! (Errorcode =
0x98110010), retry...
Communication on bus systems
Error
00004 14-06-2008 10:47:50
EtherCAT Master Stack CTRL: Master state change from <unknown>to <init>
Communication on bus systems
Information
...