Lenze EtherCAT control technology User Manual
Page 40
Advertising
Control technology | EtherCAT communication manual
Synchronisation with "Distributed clocks"
Setting the DC synchronisation with the »EtherCAT Configurator«
40
L
DMS 3.1 EN 01/2011 TD17
2. Activate the DC functionality for the first slave (DC master) connected to the bus
master (select "DC for synchronization"):
3. Also activate the DC functionality (select "DC for synchronization") for all other
slave devices which are to use the DC synchronisation.
Note!
Maintain all other basic DC settings for the slaves to ensure a correct DC
synchronisation.
Advertising