Lenze EtherCAT control technology - Manual (Page 46)

Control technology | EtherCAT communication manual
Commissioning of the system
Detailed commissioning steps
46
L
DMS 3.1 EN 01/2011 TD17
7.2.3 Creating a project folder
Create a project folder on the engineering PC.
Use this project folder to store the below data generated in the different project
configuration steps:
 The project file created in the »EtherCAT Configurator«
 The configuration files exported from the »EtherCAT Configurator«:
– ECAT_PLC_CFG_1.XML
– ECAT_MASTER_1.XML
 The project data created in the »Engineer«
 The project file created in the »PLC Designer«

Tip!
Create a separate project folder for every EtherCAT configuration and store the
project and configuration files in this folder.