Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual User Manual
Rockwell Automation Equipment
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1757-UM006A-EN-P
- Important User Information
- Preface
- Contents guide
- Conventions
- Rockwell Automation Technical Support
- Important User Information ii
- Contents guide P-1
- Conventions P-2
- Rockwell Automation Technical Support P-3
- Fieldbus Organization 1-1
- Standard Function Blocks 1-6
- Device Descriptions and Block Parameters 1-27
- Foundation Fieldbus Performance 1-29
- Overview 2-1
- Control Mode Interaction 2-19
- Link and Block Schedules 2-24
- Tags, Addresses, and Live List 2-28
- Foundation Fieldbus Performance 2-30
- Notification Scheme 2-32
- Reference Publications 3-1
- Installing 1757-FIM Fieldbus Interface Module 3-4
- Installing 1757-RTP Remote Terminator 3-4
- Before You Start 4-1
- Configuring Fieldbus Components In a Control Strategy 4-3
- ACSYNCINTR 4-8
- Loading Components Online 4-51
- Summary 4-60
- Monitoring Fieldbus Functions Through Station Displays 5-1
- Monitoring Fieldbus Functions Through Monitoring Tab 5-2
- Adding, Removing and Replacing Components 6-1
- Upgrading firmware in an uncommissioned device 6-3
- Interpreting Component LED Indications 6-5
- Checking Fieldbus Device Calibration 6-6
- Blocks in the Linking Device 7-1
- Analog Inputs 7-2
- Analog Outputs 7-5
- Discrete Inputs 7-9
- Discrete Outputs 7-11
- Alarm Handling by the HMI 7-14
- Assembly Objects 7-14
- Trends and Alarms 7-18
- Tips for Connecting to a 1756-ENET Controller 7-19
- Axxx Blocks A-1
- Bxxx Blocks A-2
- Cxxx Blocks A-7
- Dxxx Blocks A-10
- Exxx Blocks A-14
- Fxxx Blocks A-14
- Gxxx Blocks A-19
- Hxxx Blocks A-20
- Ixxx Blocks A-22
- Jxxx Blocks A-24
- Kxxx Blocks A-24
- Lxxx Blocks A-24
- Mxxx Blocks A-27
- Nxxx Blocks A-29
- Oxxx Blocks A-29
- Pxxx Blocks A-32
- Qxxx Blocks A-33
- Rxxx Blocks A-34
- Sxxx Blocks A-39
- Txxx Blocks A-46
- Uxxx Blocks A-48
- Vxxx Blocks A-49
- Wxxx Blocks A-49
- Xxxx Blocks A-50
- Yxxx Blocks A-50
- Zxxx Blocks A-50
- B-1
- Reference C-1
- D-1
- Fieldbus Topologies D-1
- Power Conditioning D-2
- Power Distribution D-3
- Signal Degradation Limitations D-3
- Cable Guidelines D-5
- Cable Attenuation D-5
- Signal Distortion vs Capacitance D-6
- Calculating Attenuation D-7
- Testing the Cable D-7
- Repeaters D-7
- About Fieldbus Library Manager E-1
- Description E-2
- Overview F-1
- Required Hardware for Installation Example F-2
- Required Software F-3
- Example Description F-3
- Connecting the Hardware F-5
- Install the 1788-FFCT Software F-6
- Adding an Interface Device F-7
- Installing Device Descriptions (DDs) F-14
- Starting NIFB F-17
- Troubleshooting the Port Configuration F-18
- Start FCS F-19
- Sending Data To the PLC-5, CLX, PLX or SLC F-36
- PLC-5 and ControlLogix Applications F-40
- ControlLogix Application F-41
- Testing the Installation Example F-46
- Messages to PLC-5s and CLX to Get Data from CN2FF F-47
- Remote Configuration of a Fieldbus Network via the 1788-CN2FF F-49
- Troubleshooting an Application F-51
- Table of Contents
- 1 - The Fieldbus Communication Module
- 2 - Integrating Fieldbus into Rockwell Automation Logix System
- Overview
- Background - the goals of integration
- Fieldbus Integrated Architecture
- Fieldbus Interface Modules - The Key to an Integrated System
- Configuration Tools
- Foundation Fieldbus Configuration Tool
- Centralized Operator Interface
- Network Management description
- System Management Description
- About the Device Object
- About the VFD Object
- Fieldbus Device Analog Input Integration
- Fieldbus Analog Input data manipulation
- Fieldbus device Analog Output or PID integration
- Fieldbus Analog Output or PID data manipulation
- Fieldbus device Discrete Input integration
- Fieldbus Discrete Input data manipulation
- Fieldbus device Discrete Output data integration
- Fieldbus Discrete Output data manipulation
- Interface Connections Summary
- Fieldbus status data details
- Fieldbus Status Indications
- Control Mode Interaction
- Link and Block Schedules
- Tags, Addresses, and Live List
- Foundation Fieldbus Performance
- Notification Scheme
- Overview
- 3 - 1757-FIM Planning Considerations
- 4 - Configurating the 1757-FIM
- Before You Start
- Configuring Fieldbus Components In a Control Strategy
- ACSYNCINTR
- Adding Fieldbus Interface Module to Project
- Checking link configuration
- Making a Fieldbus Device Template from a Vendor's DD
- Making a fieldbus device template from existing definition (.DEF) files
- Adding a Fieldbus Device to Project
- Assigning a Device to a Link in Project
- Checking Device Configuration
- Creating Control Module for Sample PID Loop
- Creating Control Module in Project
- Adding blocks to CM for sample loop
- Configuring AI block for sample loop
- Configuring DATAACQ block for sample loop
- Configuring PID block for sample loop
- Configuring AO block for sample loop
- Wiring blocks in CM101 for sample loop
- Adding parameter connectors for sample loop interlocks
- Loading Components Online
- Summary
- 5 - Operating the 1757-FIM
- 6 - 1757-FIM General Maintenance, Checkout,and Calibration
- 7 - Using the 1788-CN2FF, ControlNet-to-FOUNDATION Fieldbus H1 Linking Device
- A - Standard Function Block Parameters
- Axxx Blocks
- Bxxx Blocks
- Cxxx Blocks
- Dxxx Blocks
- Exxx Blocks
- Fxxx Blocks
- Gxxx Blocks
- Hxxx Blocks
- Ixxx Blocks
- Jxxx Blocks
- Kxxx Blocks
- Lxxx Blocks
- Mxxx Blocks
- Nxxx Blocks
- Oxxx Blocks
- Pxxx Blocks
- Qxxx Blocks
- Rxxx Blocks
- Sxxx Blocks
- Txxx Blocks
- Uxxx Blocks
- Vxxx Blocks
- Wxxx Blocks
- Xxxx Blocks
- Yxxx Blocks
- Zxxx Blocks
- B - Fieldbus Status Display Indications
- C - Mode Change Conditions
- D - Fieldbus Wiring Considerations
- E - Fieldbus Library Manager
- F - 1788-CN2FF Installation Example
- Overview
- Required Hardware for Installation Example
- Required Software
- Example Description
- Connecting the Hardware
- Install the 1788-FFCT Software
- Adding an Interface Device
- Installing Device Descriptions (DDs)
- Starting NIFB
- Troubleshooting the Port Configuration
- Start FCS
- Sending Data To the PLC-5, CLX, PLX or SLC
- PLC-5 and ControlLogix Applications
- ControlLogix Application
- Testing the Installation Example
- Messages to PLC-5s and CLX to Get Data from CN2FF
- Remote Configuration of a Fieldbus Network via the 1788-CN2FF
- Troubleshooting an Application
- List of Figures
- How Are We Doing?
- Backcover