Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual User Manual
Page 275
Publication 1757-UM006A-EN-P May 2002
1788-CN2FF Installation Example F-27
If you ever plan to change the name of a Function Block, do it
now. After you do your download, you do not want to change
any connections, or Tag names.
When you look at the Device Info window after you download,
you will see the value of using very short names for the Device
and the Function Blocks.
8. Highlight the RB function block in the Library of Function
Blocks, and click the right mouse button.
9. Select Set Tag.
10. Assign a name to the block that is appropriate for your
application.
11. Continue this process for all the Fieldbus Devices.
Each time you SET a TAG, and after a short delay, the Set Tag
window will close, and you should get the following status
messages on the bottom of the screen.