Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 204)

Publication 1757-UM006A-EN-P - May 2002
A-24 Standard Function Block Parameters
Jxxx Blocks No J parameters
Kxxx Blocks No K parameters
Lxxx Blocks Table A.65 LIM_Notify
Table A.66 L_TYPE
Valid Views VIEW_3
Storage Non-Volatile
Remarks Read Only
The Data type consists of the value and status of floating point parameters
that are Inputs or Outputs. It uses the following two elements.
• Status
• Value
Classification Simple Variable
Description Defines the maximum number of unconfirmed alert notify messages allowed.
FF Data Type Unsigned 8
Range 0 to MAX_NOTIFY
Usage C/Contained
Length 1
Valid Views VIEW_2
Storage Static
Remarks Initial value is MAX_NOTIFY
Classification Simple Variable
Description Determines whether the values passed by the Transducer block to the Analog
Input block may be used directly (DIRECT) or, if the value is in different units,
must be converted linearly (indirectly); or with square root (Ind Sqr Root), using
the input range defined by the transducer and associated output range.
FF Data Type Unsigned 8
Range 1: Direct
2: Indirect
3: Ind Sqr Root
Usage C/Contained