Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 106)

Publication 1757-UM006A-EN-P - May 2002
4-20 Configurating the 1757-FIM
9. After loading is complete, double-click the function block you
want to view or edit under the device directory on the left side
of the FLM window.
Block parameters are displayed in table format on the right side
of the FLM window.
TIP
By keeping default values, you may use the same
template for like vendor devices used in multiple
locations in your application. You can make
adjustments to selected device parameters through
Control Builder configuration access.
You can find definitions for many of the standard
fieldbus function blocks in Appendix A in this
document. Vendors also supply a text file that
includes definitions for each function block used in
their device.