Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 4)

Publication 1757-UM006A-EN-P - May 2002
About this document P-2
Conventions The following table summarizes the terms and type representation
conventions used in this Guide.
Table P.B Convention Definitions
Term/Type
Representation Meaning Example
Click Click left mouse button once. (Assumes cursor is positioned on
object or selection.) Click the Browse button.
Double-click Click left mouse button twice in quick succession. (Assumes
cursor is positioned on object or selection.) Double click the Station icon.
Drag Press and hold left mouse button while dragging cursor to new
screen location and then release the button. (Assumes cursor is
positioned on object or selection to be moved.) Drag the PID function block onto the
Control Drawing.
Right-click Click right mouse button once. (Assumes cursor is positioned on
object or selection.) Right-click the AND function block.
<F1> Keys to be pressed are shown in angle brackets. Press <F1> to view the online Help.
<Ctrl>+<C> Keys to be pressed together are shown with a plus sign. Press <Ctrl>+<C> to close the window.
File->New Shows menu selection as menu name followed by menu
selection Click File->New to start new drawing.
>D:\setup.exe< Data to be keyed in at prompt or in an entry field. Key in this path location
>D:\setup.exe<.