Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 222)

Publication 1757-UM006A-EN-P - May 2002
A-42 Standard Function Block Parameters
Table A.112 SIMULATE
Table A.113 SIMULATE_D
Table A.114 SP
Classification Record
Description Allows the transducer analog input or output to the block to be manually sup-
plied, when SIMULATE is enabled. When SIMULATE is disabled, the simulate
value and status track the actual value and status.
FF Data Type DS-82
Usage C/Simulate
Length 11
Storage Dynamic
Remarks The data type consists of simulate and transducer floating point value and sta-
tus and a simulate enable/disable discrete. It uses the following five ele-
ments.
1: Simulate Status
2:Simulate Value
3: Transducer Status
4: Transducer Value
5: Simulate Enable/Disable
Classification Record
Description Allows the transducer discrete input or output to the block to be manually sup-
plied, when SIMULATE is enabled. When SIMULATE is disabled, the simulate
value and status track the actual value and status.
FF Data Type DS-83
Usage C/Simulate
Length 5
Storage Dynamic
Remarks The data type consists of a simulate and transducer discrete value and status
and a simulate enable/disable discrete. It uses the following five elements.
1: Simulate Status
2:Simulate Value
3: Transducer Status
4: Transducer Value
5: Simulate Enable/Disable
Classification Record
Description Defines the setpoint of any analog block.
FF Data Type DS-65
Range PV_SCALE +/- 10 percent
Usage C/Setpoint
Length 5