Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 288)

Publication 1757-UM006A-EN-P May 2002
F-40 1788-CN2FF Installation Example
PLC-5 and ControlLogix
Applications
After the initial, setup the task is to get data to and from a controller.
You can move Fieldbus data to and from SLCs, PLC-5’s, ControlLogix
5550, and ProcessLogix. The first stage is to set up a working Fieldbus
network that has connections to the linking device. Here is an
example configuration.:
The AI function block, FB, in the E + H pressure transmitter, the AI FB
in the Honeywell temperature transmitter, and both the Pressure AI
and the Temperature AI in the Rosemount Pressure Transmitter are all
connected to the CN2FF Multiple Analog Input, MAI, function block.
The AO FB in the Multiple Analog Output, MAO, of the CN2FF is
connected to the CAS_IN pin of the SMAR #1 AO function block. The