Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 217)

Publication 1757-UM006A-EN-P - May 2002
Standard Function Block Parameters A-37
Table A.99 RESET
Table A.100 RESTART
Table A.101 ROUT_IN
Classification Simple Variable
Description Represents the Integral time constant in seconds. It is the inverse of repeats
per minute.
FF Data Type Float
Range Positive
Usage C/Contained
Length 4
Valid Views VIEW_4
Storage Static
Classification Simple Variable
Description Allows a manual restart to be initiated. The following degrees of restart are
possible.
• Run
• Restart Resource
• Restart with Defaults
• Restart Processor
FF Data Type Unsigned 8
Range 1: Run
2: Restart Resource
3: Restart with Defaults
4: Restart Processor
Usage C/Contained
Length 1
Storage Dynamic
Remarks Changing this parameter, may be fatal to communication.
Classification Record
Description Represents target output and status provided by a host to a control block for
use as the block's output in ROUT mode.
FF Data Type DS-65
Usage C/Remote-Output In
Length 5