Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 99)

Publication 1757-UM006A-EN-P - May 2002
Configurating the 1757-FIM 4-13
1. Double-click the link icon .
The Link Block Parameters window opens.
2. Leave the CB assigned name LINKxx, where xx equals the next
unique sequential number assignment. Or, enter a unique
number of up to 16 characters.
3. In the Description field, enter a description of up to 24
characters. This text appears in applicable detail and group
displays associated with this block.
The other parameters can not be configured because they are
only active in the Monitoring tab after the FIM/LINK is loaded
and communicating with the system.