Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 115)

Publication 1757-UM006A-EN-P - May 2002
Configurating the 1757-FIM 4-29
1. Double-click the device icon in the Project tab.
The Block Parameters window opens.
2. In the Name field, leave the default name or enter a unique
name of up to 16 characters.
3. In the Description (DESC) field, enter the desired description of
up to 59 characters, or leave it blank.
4. In the Device Network Node Address (ADDR) field, leave the
default address.
5. In the Device Identification (DEV_ID) field, enter the
manufacturer’s ID for the device, if known.
The ID will be detected when the device is commissioned.
6. In the Physical Device Tag (PD_TAG) field, leave the assigned
tag name, or enter the name that matches the one configured in
the device, up to 16 characters.