Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 261)

Publication 1757-UM006A-EN-P May 2002
1788-CN2FF Installation Example F-13
This is the name for the Fieldbus connection on port 0 of the
linking device.
2. Click OK.
You see:
Now that you have defined the communication path to the Fieldbus
network, the Device Descriptions (DD's) need to be loaded for the
devices you are going to configure.
IMPORTANT
The ports on the front of the 1788-CN2FF are labeled
Port 1 and Port 2. However, the software labels them
Port0 and Port1. We are using the first port on the
linking device, which will appear as port 0 in the
software, but is physically marked as port 1 on the
linking device.