Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 97)

Publication 1757-UM006A-EN-P - May 2002
Configurating the 1757-FIM 4-11
12. Leave all other fields on the Main tab at their defaults, as these
are the only valid values at this point.
Click the Statistics tab.
Data is only present in these fields when the FIM/LINK is loaded
and communicating with the system.
13. Click the Server Parameters Tab.
14. Leave the Point Detail Page and Control Level fields at their
default.
The Associated Display and Group Detail Page are not required
to complete the configuration, but can be entered if known.