Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 102)

Publication 1757-UM006A-EN-P - May 2002
4-16 Configurating the 1757-FIM
12. Click the Application tab.
13. In the Device Name (DEVNAME) field, either leave the default
name, or enter a new name of up to 33 characters.
14. The parameters on the Network Management tab are only
accessible in the Monitoring tab with the FIM/LINK
communicating with the system.
Click the Server Parameters tab.
TIP
The remaining parameters on this tab define the
Application Relationships that determine how
Application Processes communicate with each other.
Leave the default values for these parameters, then
revisit them in the Monitoring tab when the
FIM/LINK is communicating with the system.