Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 256)

Publication 1757-UM006A-EN-P May 2002
F-8 1788-CN2FF Installation Example
You see:
2. For Interface Type check CONTROLNET.
When you select ControlNet, the dialog box changes to reflect
the default ControlNet parameters.
3. Enter the Driver name for you ControlNet interface, AB_PCIC-1,
AB_KTC-1, or AB_PCC.
If you do not know the name of your driver, follow the
procedure in Finding the Interface Driver Name on page F-9.
Check CONTROLNET
Enter the ControlNet
driver name
Enter the ControlNet MAC-ID
of the CN2FF.
Enter 1 or 2 depending on the number
of Foundation Fieldbus channels
attached to the 1788-CN2FF.
This is the default path from the PC
to the 1788-CN2FF. Use this path
with the PC on the same ControlNet
as the 1788-CN2FF.
ATTENTION:
The driver name must be entered EXACTLY
(case, punctuation, underscores) as it is listed
in RSLinx. refer to Finding the Interface Driver
Name on page F-9 for an example.