Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 223)

Publication 1757-UM006A-EN-P - May 2002
Standard Function Block Parameters A-43
Table A.115 SP_D
Table A.116 SP_HI_LIM
Valid Views VIEW_1, VIEW_3
Storage Non-Volatile
Remarks Normally, the operator has permission to write this value, but PROGRAM or
LOCAL remove the permission and grant it to a supervisory computer or a local
control panel.
The data type consists of the value and status of floating point parameters
that are Inputs or Outputs. It uses the following two elements.
• Status
• Value
Classification Record
Description Defines the setpoint of any discrete block.
FF Data Type DS-66
Range PV_STATE
Usage C/Setpoint
Length 2
Valid Views VIEW_1, VIEW_3
Storage Non-Volatile
Remarks Normally, the operator has permission to write this value, but PROGRAM or
LOCAL remove the permission and grant it to a supervisory computer or a local
control panel.
The data type consists of the value and status of discrete value parameters. It
uses the following two elements.
• Status
• Value
Classification Simple Variable
Description Defines the high limit for setpoint entry.
FF Data Type Float
Range PV_SCALE +/- 10 percent
Usage C/Contained
Length 4
Valid Views VIEW_2
Storage Static
Remarks Initial value is 100 percent