Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 122)

Publication 1757-UM006A-EN-P - May 2002
4-36 Configurating the 1757-FIM
Adding blocks to CM for sample loop
1. In the Project tab, expand the FIM down to the device block
level by clicking the left of FIM, then LINK_S101, then ST101.
2. Click and drag the AI block to CM101 chart.
An FF AI block is added to the CM101 chart.
3. In the Library tab, expand the DATAACQdirectory by clicking
the .